Embedded Eye

Give your gizmo the gift of sight

Jianguo Zhao
Share on Facebook Share on Facebook Share

Jianguo Zhao's Discussions

About wire bonding the Stonyman Vision Chip to our PCB
4 Replies

HelloWe want to design a small board with inertial sensor, microcontroller, and the Stonyman vision chip for a miniature robot. However, we cannot handle the Stonyman in bare form. May I ask will you…Continue

Started this discussion. Last reply by Jianguo Zhao May 30, 2013.

 

Jianguo Zhao's Page

Latest Activity

Jianguo Zhao replied to Jianguo Zhao's discussion About wire bonding the Stonyman Vision Chip to our PCB
"That's great, thanks a lot!"
May 30, 2013
Geoffrey L. Barrows replied to Jianguo Zhao's discussion About wire bonding the Stonyman Vision Chip to our PCB
"I've never seen the current be more than several milliamps but that really depends on the bias settings."
May 30, 2013
Jianguo Zhao replied to Jianguo Zhao's discussion About wire bonding the Stonyman Vision Chip to our PCB
"Geoffrey, Thanks for your quick reply! We will follow the design of the Aphid. Another question is how much current the Stonyman will draw in normal use? We cannot find this number in the datasheet. Thanks!"
May 30, 2013
Geoffrey L. Barrows replied to Jianguo Zhao's discussion About wire bonding the Stonyman Vision Chip to our PCB
"We can do custom wirebonding jobs. It is not that expensive but the cost can vary depending on the circuit board and tolerances etc. As for the footprint for the Stonyman- the layouts from either the Aphid or the Stonyman Breakout Board are fine.…"
May 30, 2013
Jianguo Zhao posted a discussion

About wire bonding the Stonyman Vision Chip to our PCB

HelloWe want to design a small board with inertial sensor, microcontroller, and the Stonyman vision chip for a miniature robot. However, we cannot handle the Stonyman in bare form. May I ask will you provide the wire bonding service? How much will it cost for small volume such as five pieces.Also, it seems that the footprints of the Stonyman are different for the Stonyman Vision Chip Breakout board and the new Aphid vision sensor board. Which footprint is correct?Thanks for your help!See More
May 30, 2013
Jianguo Zhao is now a member of Embedded Eye
May 28, 2013

Profile Information

Technical interest
image sensor chips, vision hardware, ground robotics, airborne robotics

Comment Wall (1 comment)

At 1:24pm on November 13, 2013, FRANKKWABENA said…

Good Day,

How is everything with you, I picked interest on you after going through your short profile and deemed it necessary to write you immediately. I have something very vital to disclose to you, but I found it difficult to express myself here, since it's a public site.Could you please get back to me on:( mr.frankkwabena000@yahoo.co.th ) for the full details.

Have a nice day

Thanks God bless.

Mr.Frank

You need to be a member of Embedded Eye to add comments!

Join Embedded Eye

 
 
 

© 2017   Created by Geoffrey L. Barrows.   Powered by

Badges  |  Report an Issue  |  Terms of Service